Cell structure of microcellular combustible object foamed by supercritical carbon dioxide

In order to solve the issue that the combustible objects for cased telescoped ammunition (CTA) didn't burn completely during the combustion process, the microcellular combustible objects were foamed with numerous cells in the micron order to improve the combustion performance by the supercritical carbon dioxide (SCCO₂) foaming technology. As the cell structure determined the combustion properties of microcellular combustible objects, the solubility of SCCO₂ dissolved into the combustible objects was obtained from the gravimetric method, and scanning electron microscope (SEM) was applied to characterize the cell structure under various process conditions of solubility, foaming temperature and foaming time. SEM images indicate that the cell diameter of microcellular combustible objects is in the level of 1 μm and the cell density is about 10¹¹ cell⋅cm⁻³. The microcellular combustible objects fabricated by the SCCO₂ foaming technology are smooth and uniform, and the high specific surface area of cell structure can lead to the significant combustion performance of microcellular combustible object for CTA in the future.     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

海洋环境中基于WVD的LFM信号检测方法

海洋环境中弱信号的谱与海杂波的谱相混叠 ,目标和背景的位置差异很小 ,经典的频域或空域处理对海杂波中弱信号的检测难以奏效。鉴于Wigner-Ville分布 (WVD)对线性调频信号 (LFM )具有时频聚集性这一特点 ,提出了一种海洋环境中基于WVD的LFM信号检测方法。利用雷达采集的真实海杂波数据 ,在不同信杂比的条件下 ,研究了该方法与经典频域法在信号检测中的差别。通过实验分析 ,与经典方法相比 ,该方法具有明显的优越性 ,且信杂比达到 -14 . 3dB时 ,其仍能很好地对信号进行检测。     

内置频率对Duffing振子微弱二进制相移键控信号盲检测影响

采用Duffing振子实现对微弱二进制相移键控（Binary Phase Shift Keying, BPSK）信号的盲检测时，Duffing系统输出的周期态和混沌态转换之间存在过渡带。针对这一问题，推导出过渡带时长和Duffing系统内置频率之间的关系表达式；指出内置频率越高，过渡带时间越短；仿真实验给出时间频率响应曲线。内置频率的提高，会降低系统检测微弱信号的灵敏度。针对这一问题，推导出周期态下Duffing系统输出幅度作为因变量、内置频率作为自变量的表达式；仿真实验给出幅频响应曲线。针对微弱BPSK信号盲检测，建立变尺度方法和检测阵列相结合的基于S变换提取Duffing系统输出幅度包络的微弱BPSK信号盲检测模型，仿真实验验证了模型方法的有效性。     

使用双水压传感器抗风浪干扰原理

提出了在水雷上使用双水压传感器的设想.传统水雷只使用一个水压传感器,提供的信号信息稍嫌不足,给水压引信抗风浪干扰带来了限制.通过使用两个传感器,利用海浪水压场传播时在两个传感器上的时延信息,使用抵消方法压制海浪水压信号.初步分析表明,使用双传感器可以使水压引信抵抗一定的海浪水压信号的干扰.     

密封库房中降湿机的使用分析

本文对国防仓库配用的不同类型的冷冻式降湿机的使用进行了研究,给出了确定开机时间的计算公式,为正确使用降湿机提供了依据。     

质漏对联合循环化学发动机性能的影响

分析存在有限速率传质和质漏损失的联合循环化学发动机性能,导出功率、效率最佳关系,最大功率及其相应效率,以及最大效率及其相应功率     

顾及噪声影响的GNSS高程序列预测Prophet方法

全球导航卫星系统(global navigation satellite system, GNSS)高程时间序列具有非平稳、非线性、含噪声等特点,在深入研究Prophet预测模型的基础上,针对Prophet预测模型对于趋势信号和周期信号有良好预测效果这一特性,提出一种引入经验模态分解(empirical mode decomposition, EMD)的“降噪—分解—预测”组合GNSS高程时间序列预测方法。该方法先将原始时间序列进行EMD降噪,再对降噪后的序列进行分解预测,最后重构各分量预测信号为最终预测序列。通过对实测高程数据进行研究,实验结果表明：降噪后信号的平均信噪比为10.30dB,能量百分比平均为88.75%;利用所构建的短期预测方法,GNSS高程时间序列预测结果的均方根误差分别平均提升26.41%和14.88%;平均百分比误差分别平均提升18.92%和7.91%,验证了组合预测方法的有效性及实用性。